Demand Energy Opt 300x167Demand Energy
Demand Energy, an Enel Group Company, has developed a best-in-class Distributed Energy Network Optimization System (DEN.OS) that aggregates and controls DERs, optimizing multiple value streams from energy storage and microgrids for utilities and C&I users. The company provides a turnkey solution (hardware, software, and services) that ties together modeling, design, and simulation with installation and operational monitoring, control, and financial optimization, to deploy storage-plus-DG systems at speed and scale. The DEN.OS software platform was designed as a scalable end-to-end solution that delivers differentiated value across the entire project life cycle. For more information, visit our website listed below.

Bradford White Opt 161x300Bradford White
Bradford White’s AeroTherm water heaters utilize advanced heat pump technology in combination with traditional electric elements to deliver a much higher efficiency than standard electric water heaters. For plumbing professionals, the AeroTherm Series features will save time, energy, and money. They are ENERGY STAR-qualified, with a uniform energy factor rating of 3.24 for the 50-gallon model. They come with four operation modes: heat pump, hybrid, electric, and vacation. The AeroTherm uses existing water and electrical connections. Bradford White offers an optional duct kit available for adapting to confined space conditions, and a 10-year warranty. Bradford White’s AeroTherm is manufactured in Middleville, MI, and built to be the best.

Miura Fmt 300x214Miura
At AHR 2018, Miura, the world’s largest steam boiler company with manufacturing facilities in Rockmart, GA, will showcase their unique “Full Steam in Less Than 5 Minutes” EX Gas/Oil Series High Pressure, and LX Gas/Low NOx Series, Low and High Pressure Steam Boilers. The EX-Series (available in 100HP and in 50HP increments up to 300HP models) are the most versatile industrial steam boilers in the world. Their design minimizes carryover and produces 99+% dry saturated steam in less than 5 minutes from a cold start. The LX-Series (available in boilers from 50–300HP) use natural gas or propane. Their compact size allows most models to fit through an industrial 7-foot doorway, while their naturally low NOx ratings are as low as 9 ppm depending on model. See Miura at North Hall—Booth 2956, or visit our website listed below.

American Wind Fmt 2 300x162American Wind Inc.
Resulting from the April 27, 2011 Tornado Super Outbreak tragedy in North Alabama, an idea was created to bring power closer to the point of use. This idea is what American Wind Inc. was founded on. American Wind Inc. is an original equipment manufacturer of green energy systems, primarily micro wind turbine systems. Holding two patents, American Wind has developed a revolutionary wind turbine called the MicroCube, which is the foundation of all their products. The MicroCube produces a wind tunnel-certified 1 kW of electricity in a wind turbine the size of a basketball.

Eagle View Neigh Fmt 300x192EagleView
The EagleView SunSite Report delivers precise roof measurements and 3D models designed to meet the needs of solar installers and designers at multiple stages of a photovoltaic project. With data derived from high-resolution Pictometry aerial imagery, the SunSite Report offers far greater accuracy than satellite images can provide. Enterprise and smaller residential installers save hours on each project with EagleView’s guaranteed-accurate measurements and data, including azimuth calculations, roof area and pitch diagrams, and roof penetration locations. SunSite Reports include DXF or JSON files that easily import into popular solar design products for an even faster, more efficient workflow.

Schneider Electric 23 Fmt 300x200Schneider Electric
Schneider Electric EcoStruxure Microgrid Advisor is a cloud-based, demand-side energy management software platform that allows users to collect, forecast, and automatically optimize the operation of distributed energy resources (DER) using predictive algorithms. Users can take control of their energy future by leveraging this easy-to-use tool to automatically, dynamically, and remotely manage DER. Powered by advanced predictive and learning algorithms, Schneider Electric EcoStruxure Microgrid Advisor automatically optimizes when end-users should consume, produce, or store energy for the highest levels of performance, reliability, and cost savings. Learn more at our website listed below.

Continental Control Sy Fmt 292x300Continental Control Systems
Continental Control Systems, a leader in economical and high-accuracy measurement of electrical production and consumption, has designed a new meter module for mass production, customizable for OEM metering design-in. The WattNode Meter Module is a bidirectional networked energy meter offering energy measurement parameters such as energy (kW), power (kWh), voltage, current, demand, kVAR, kVARh, power factor, frequency, etc. These energy values are communicated using the Modbus RTU communication protocol over RS-485. Revenue-grade accuracy is obtainable using the CCS Accu-CT family of current transformers; otherwise, the meter module utilizes any externally mounted or PCB-mounted 0.333 Vac current transformers.

Easi Set Electrical Fmt 300x200Easi-Set Precast Concrete Buildings
Installed in just hours, built to last for decades. Precast concrete buildings from Easi-Set are engineered to meet your exacting standards. Available for standard or custom applications, from small pre-outfitted generator and hazmat buildings to large 50 feet-by-250 feet substations with Easi-Span clear-span roofs. Easi-Set buildings are durable and impervious to almost any degree of inclement weather, vandals, fires, and blasts. These steel reinforced and post-tensioned buildings have standard ratings for 165 mph winds, and seismic category E, with higher options available. They can be insulated and climate controlled to handle any outfitted equipment. Manufactured across North America by licensed Easi-Set producers.

Z1000 U 1 200x300Yaskawa America Inc.
Add significantly to your green initiative with the Yaskawa Z1000U HVAC Matrix Drive, the product that goes beyond conventional drives by combining excellent harmonic mitigation, input power factor control, and energy saving capabilities. The Z1000U provides low harmonic distortion in a space-saving design, along with the same HVAC-specific features as the standard Z1000. This single-component solution achieves excellent low distortion levels all by itself, without the need for additional countermeasures such as passive filters or multi-pulse arrangements. Unlike conventional drives, Yaskawa’s matrix technology creates a variable output by switching directly from the input power, eliminating the DC Bus.

Com Ap Opt 300x221ComAp
The InteliGen 200 joins the InteliLite and InteliNano NT product ranges to ensure ComAp has a control solution for any industrial generator application.




Trane Product Image Air Fmt 2 300x167

Trane Air-Fi wireless technology is available with carbon dioxide and occupancy sensing options. Customers can use one device to measure temperature, relative humidity, CO2, and occupancy status without the use of wires, resulting in lower installation costs, streamlined processes, and ease of operation. With Air-Fi wireless technology, installations can be completed quickly with less disruption to occupants in existing buildings, while also providing greater reliability. Wireless sensors are easy to move to resolve issues related to sensing accuracy, aesthetics, or reconfigured spaces. Air-Fi is a ZigBee-Certified Building Automation Solution, and the system’s platform supports BACnet open standards.

Aksa 0240 Fmt 300x191Aksa Power Generation USA
Aksa Power Generation becomes a new player in the US power generation market. Aksa began introducing its product in the US at the end of 2012. Investments in UL certification, seismic certification, and the expansion of their facility in Louisiana show that Aksa is committed to being a top supplier of industrial generators for North America. Aksa’s product line consists of diesel generators 9 kW to 2,000 kW, natural gas generators 30 kW to 425 kW, and mobile generators 56 kW to 400 kW. Under the strict guidelines of ISO9001, UL2200, and NFPA, Aksa produces high-quality generators meeting today’s industry codes.

Rce Photo Opt 300x201Robinson Custom Enclosures
Robinson Custom Enclosures has the unique ability to provide their customers with comprehensive turnkey solutions for even the most complex structural and acoustic projects or specifications. They handle all facets of the project in-house, from mechanical and electrical engineering to fabrication and packaging, which controls quality, lead times, and your bottom line. No project is too big or too complex. Robinson is your single-source solution.

Dent Instruments Fmt 213x300Dent Instruments
The PowerScout HD Series High Density Submeters are designed to monitor any multiple, single, or three-phase electrical loads with a single meter. They pair intelligent metering features with forward-thinking design elements to bring an innovative multi-circuit submeter to the marketplace of generic metering products. By combining multiple native features like Modbus and BACnet, serial and Ethernet, and user-selectable voltage and amperage ranges, the PowerScout HD meets the widest range of submetering applications on the market in one single meter—driving down overall installation and material costs, and further reducing the cost per meter point.

Massa Products Corp Fmt 4 300x203Massa Products Corp.
MassaSonic PulStar provides continuous level sensors that perform reliably in liquid, paste, and solid applications. Available in durable PVDF or PVC housings, these ultra-compact ultrasonic sensors are easy to use, fully programmable, and come with an IP68 submersion rating. The PulStar Plus 95 accurately measures from 8 inches to 20 feet, comes with no false echoes programing, and works in environments with vapors. Multiple models are available in the product series offering 0–10 VDC, 4–20 mA, TTL and RS-485 output, Modbus compatible. PulStar delivers economical results for equipment control, tank monitoring, and OEMs.

Danfoss Rev 6th Opt 2 300x221Danfoss
Danfoss, the pioneer of oil-free magnetic bearing, variable-speed technology, has been named a winner in the prestigious 2018 AHR Expo Innovation Awards in the green building category for its Turbocor TTH/TGH high-lift compressors.

The new Danfoss Turbocor TTH/TGH high-lift compressors offer outstanding full- and partial-load efficiency, low vibration and sound, a small footprint, and reduced maintenance, while providing an expanded operating map suitable for high-lift applications like air-cooled chillers and heat recovery.

De Bug Web

More in Home