KOHLER Introduces Advanced New Controller for Industrial Generators

APM603 provides intuitive control, system monitoring, and system diagnostics for generator sets

Kohler Apm603 Mr

KOHLER is pleased to introduce the APM603, a new Advanced Power Management (APM) controller for industrial generators, which provides intuitive control, system monitoring, and system diagnostics for single generators or as many as eight units installed in parallel. The controller also supports load management to ensure critical loads are always powered and allows for generator management where multiple units in parallel can be turned on and off as load demands dictate.

The APM603 – which meets NFPA 110 Level 1 requirements – interfaces the generator to other power system equipment and network management systems using standard industry network communications. The new controller also integrates a patented hybrid voltage regulator and unique software logic to manage alternator thermal overload protection as well as serve as an overcurrent protective device. Obtaining all these features would typically require additional hardware and costs. 

“The APM603 functions as the brain of a generator – it continuously monitors and manages the entire system to ensure optimal performance,” said Nicole Dierksheide, Associate Director of Marketing, Electronics for KOHLER industrial generators. “Given the critical role that the APM603 plays within a power system, these controllers were designed and manufactured by KOHLER to provide ultimate ease-of-use for both the generator owner and those responsible for servicing it. The APM603’s large color touchscreen provides fast and intuitive access to all the information that’s most critical to the successful operation of a generator.” 

Numerous features enhance ease-of-use and system troubleshooting. The APM603 supports Modbus™ protocol through serial bus and Ethernet networks and supports SNMP and BACnet™ through Ethernet*. SnapShot is another unique feature allowing for the capture of 15 seconds of critical data if a fault or warning should occur. This data can then be viewed on the controller or downloaded for additional review. The data logging capability allows the customer to perform custom data collection to support their reporting requirements and can assist with troubleshooting. For the benefit of U.S.-based hospitals, clinics, and other healthcare providers, Joint Commission (JCAHO) reporting is also simplified through the APM603.

The KOHLER APM603 controller is available exclusively through the company’s extensive network of dealers/distributors throughout the United States. A Distributor Locator can be found online here: https://kohlerpower.com/en/generators/industrial/distributor-locator.

A global force in power solutions since 1920, KOHLER manufactures complete power systems, including generators (portable, marine, residential, commercial and industrial), automatic transfer switches, switchgear, monitoring controls, and accessories for emergency, prime power and energy-management applications all around the world. The company is committed to reliable, leading-edge power-generation products as well as comprehensive after-sale support. For additional details, please visit www.KohlerPower.com

About Kohler Co.

Founded in 1873 and headquartered in Kohler, Wis., Kohler Co. is one of America’s oldest and largest privately held companies. With more than 55 manufacturing locations worldwide, Kohler is a global leader in the manufacture of engines and power systems; kitchen and bath products; and owner/operator of two of the world’s finest five-star hospitality and golf resort destinations in Kohler and St Andrews, Scotland. For more details, please visit www.Kohler.com.

 

More in Microgrids